New Catalinbread Dreamcoat Preamp Guitar Effects Pedal

New Catalinbread Dreamcoat Preamp Guitar Effects Pedal

New Catalinbread Dreamcoat Preamp Guitar Effects Pedal
New Catalinbread Dreamcoat Preamp Guitar Effects Pedal. This item is new, in box. What began as an exploration of a specific’60s and’70s classic rock tone, evolved into a multidimensional gain machine capable of anything between unruly sputtery fuzz and classic rock chime. This is not meant to make you sound like a classic rock god, it is meant to inspire you from using some of the same tools they used that would otherwise be inaccessible in pedal form. The heart and soul of the Dreamcoat is a near-exact recreation of the preamp circuit from the Aiwa TP-1011 reel-to-reel deck that can be found in’60s and’70s classic rock recordings. All of the functionality of that unit is present, from sparkling cleans to powerful crunch and glassy leads, but the “Sat” control gives you an extra layer of grunt, allowing the Dreamcoat to range between near-dry tonal indifference to complete “melting-amp” Neil Young-esque tweed sounds. A certain classic rock sound wasn’t just a tape deck, though. Some players installed a passive inductor-based frequency “booster” into their guitars that cut both sides of the spectrum around the resonant frequency of their guitar, giving the appearance of frequency boost. To that end, we’ve added a frequency booster circuit that doesn’t cut anything, giving you a richer tone with a little oomph where it counts. To top it all off, we’ve included a clean blend circuit that begins after the frequency boost and ends after the tape preamp, so you can EQ the sum of your clean tone and dirt, all while preserving your pick attack and presence. The whole shebang runs at 20V, just a hair higher than the original Aiwa, expanding its capabilities and delivering tons of headroom. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Effects Pedals\Distortion & Overdrive”. The seller is “citymusicsteve” and is located in this country: US. This item can be shipped worldwide.
  • Model: Dreamcoat
  • To Fit: Acoustic Electric Guitar, Acoustic Guitar, Bass Guitar, Cigar Box Guitar, Classical Guitar, Electric Guitar, Lap & Pedal Steel Guitar, Resonator Guitar, Travel Guitar
  • MPN: Dreamcoat
  • Country/Region of Manufacture: United States
  • Custom Bundle: No
  • Analog/Digital: Analog
  • Brand: Catalinbread
  • Type: Distortion, Overdrive
  • UPC: 853710004888

New Catalinbread Dreamcoat Preamp Guitar Effects Pedal

Line 6 POD Go Wireless Guitar Multi-Effects Processor with G10TII Transmitter

Line 6 POD Go Wireless Guitar Multi-Effects Processor with G10TII Transmitter
Line 6 POD Go Wireless Guitar Multi-Effects Processor with G10TII Transmitter
Line 6 POD Go Wireless Guitar Multi-Effects Processor with G10TII Transmitter
Line 6 POD Go Wireless Guitar Multi-Effects Processor with G10TII Transmitter
Line 6 POD Go Wireless Guitar Multi-Effects Processor with G10TII Transmitter
Line 6 POD Go Wireless Guitar Multi-Effects Processor with G10TII Transmitter
Line 6 POD Go Wireless Guitar Multi-Effects Processor with G10TII Transmitter
Line 6 POD Go Wireless Guitar Multi-Effects Processor with G10TII Transmitter
Line 6 POD Go Wireless Guitar Multi-Effects Processor with G10TII Transmitter
Line 6 POD Go Wireless Guitar Multi-Effects Processor with G10TII Transmitter

Line 6 POD Go Wireless Guitar Multi-Effects Processor with G10TII Transmitter
Get a fantastic sound onstage without cumbersome cabling using the POD Go Wireless Guitar Multi-Effects Processor from Line 6. This pedalboard models amplifiers and cabinets, and provides a mutitude of effects, all while giving users wireless capability thanks to the built-in Relay wireless receiver and the included G10TII transmitter. With its effects coming from Line 6’s venerated HX series modeling processors, the POD GO Wireless is designed for use both live and in the studio. You’ll find dynamics tools, distortions, pitch/modulators, filters, EQs, delays, wah/volume, and reverbs. In total, you’ll find over 70 guitar and bass amps, 37 cab models, 16 mic emulations, and over 200 effects. POD Go Wireless also supports the earlier Line 6 Relay G10T transmitter. If you have one, you will need to update the G10T transmitter to the latest firmware. Wireless Upgrades Over Original. POD Go Wireless has a built-in Relay wireless receiver. The POD Go Wireless includes a convenient storage well in the back panel for transport of your transmitter. The device sports diversity antennas to receive the RF signal from the G10TII transmitter. Transmitter battery and signal indicators can be found in the display. POD Go Wireless users can choose Guitar for some of the unit’s presets, and Wireless for others, effectively turning the Input block of the POD Go Wireless into an input switcher. Up to four POD Go Wireless and/or standalone Line 6 Relay wireless systems can be used on the same stage, provided care is taken to ensure all systems are set up properly. Key Features at a Glance. Amp, cab, and effects models drawn from the award-winning HX family of processors. Simple interface with color display. 4.3 color LCD makes it easy to see what you are doing. Color footswitch LEDs indicate which type of effect is active. Load third-party cabinet impulse responses (IRs) for unlimited cabinet options. Snapshots let you seamlessly switch between tones without audio dropouts. Free POD Go Edit app for easy preset editing and backup. Pedal Edit mode lets you adjust any amp or effect parameter with your feet. Stereo effects loop and TRS expression pedal / dual footswitch input. Connect to a traditional amp via the Amp Out jack. 4-in / 4-out, 24-bit / 96 kHz audio interface for recording and reamping. Professional-quality amp, cab, and effect models drawn from the celebrated HX family of effects processors ensure best-in-class tone. Third-party speaker cab impulse responses (IRs) can also be loaded, providing nearly unlimited additional options when crafting tones. A streamlined plug-and-play interface and simple and intuitive workflow make POD Go exceptionally easy to use. Choose, edit, and control sounds using the large color LCD screen, five push encoders, and eight footswitches. Plus, a multifunction expression pedal adds a second expression pedal or two external footswitches, for even more real-time control. Remarkably light, compact, and portable, the POD Go guitar processor easily fits into any backpack, making it the perfect companion for short tours, fly dates, and rehearsals. Snapshot Variations with Presets. Snapshots enable you to create up to four variations within a single preset and seamlessly transition between them without experiencing audio dropouts and the disruption of delay and reverb tails that normally occurs when switching between presets. Audio connections include balanced stereo outputs, a duplicate amp out that can be tapped before the Cab/IR block, a stereo effects loop, a headphone jack, and even a USB port for accessing the 4-in / 4-out audio interface. A professional-quality onboard 4×4 24-bit / 96 kHz USB audio interface makes it easy to record directly to your computer. Reamping tracks is also a breeze, enhanced by the ability to load third-party speaker cabinet IRs. Third-party speaker cabinet impulse responses (IRs) may be loaded and incorporated into the signal chain of any preset, providing nearly unlimited additional options when crafting tones. POD Go Edit App. POD Go Edit is a remote editor app that brings the same easy-to-use and fast-to-get-around interface of POD Go to your Mac or PC. Edit and manage presets, load impulse responses, export tones to share, and even update the firmware from one convenient app. Line 6 POD Go Wireless Guitar Multi-Effects Processor with G10TII Transmitter. CUI INC DC-3h Power Supply. Line 6 G10TII Transmitter. 1 x 1/4 Guitar Input. 1 x 1/4 Stereo FX Loop Return/Aux Input. 1 x 1/4 Expression Input. 1 x 1/4 Send Output. 1 x 1/4 Reamp Output. 2 x 1/4 Main Outputs. 1 x 1/4 Headphone Output. 1 x USB Type-B Port. 1 x DC Power Input. 4.3 / 11 cm Color LCD. Onboard: 8 for Selecting Presets. External: Connect up to 2 (Separately Available). 4-Input / 4-Output, 96 kHz / 24-Bit. Included G10TII Wireless Transmitter. Included: G10TII Wireless Transmitter. Not Included: Original G10T Wireless Transmitter (Firmware Updated). Wireless Transmitter Charged by Guitar Input Jack. Built-In Relay Wireless Receiver. 19.9 x 12.3 x 5.7. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Effects Pedals\Multi-Effects”. The seller is “musicall” and is located in this country: US. This item can be shipped to United States.
  • UPC: 0614252315531
  • EAN: 0614252315531
  • Brand: Line 6
  • Type: Looper, Processor, Chorus, Compressor, Distortion, Fuzz
  • Analog/Digital: Digital
  • Model: Line 6 POD Go Wireless
  • MPN: 990602705
  • To Fit: Acoustic Guitar, Cigar Box Guitar, Resonator Guitar, Lap & Pedal Steel Guitar, Acoustic Electric Guitar, Electric Guitar, Bass Guitar, Travel Guitar, Classical Guitar

Line 6 POD Go Wireless Guitar Multi-Effects Processor with G10TII Transmitter