AMT Electronics V1 (VOX) guitar preamp (distortion/overdrive) effect pedal

AMT Electronics V1 (VOX) guitar preamp (distortion/overdrive) effect pedal
AMT Electronics V1 (VOX) guitar preamp (distortion/overdrive) effect pedal
AMT Electronics V1 (VOX) guitar preamp (distortion/overdrive) effect pedal
AMT Electronics V1 (VOX) guitar preamp (distortion/overdrive) effect pedal
AMT Electronics V1 (VOX) guitar preamp (distortion/overdrive) effect pedal

AMT Electronics V1 (VOX) guitar preamp (distortion/overdrive) effect pedal
We are glad to see you here! We wish you would find everything you need in our store. The best price (our prices are already too good, but we still leave it possible to make the Best Offer for most of our deals). If you havent visited our store yet, be sure to do it. And do not forget to add our store to your bookmarks! USA , Canada , Europe , Oceania , Asia = 2 5 weeks. South America = 4 8 weeks. AMT V-1 is designed around the specs of the classy UK British VOX amplifier. All tones from juicy clean to smooth but punchy low gain overdrive are fitted in this little box. You can use AMT V-1 to build a multi-channel preamp from mono channels of AMT Legend Amps series – P-1, B-1, M-1, R-1, S-1. The series is constantly expanding thus giving you a chance to obtain a unique 100% analog tool for your guitar sound shaping. AMT V-1 is a preamp with internal Clean-to-Low-gain-Overdrive channel and the possibility of switching to external channel (any auxiliary overdrive effect) by means of a foot switch. AMT V-1 has the insert loop of serial type with standard -10dB level intended for connection of auxiliary effects and boosting the effect signal to standard 0dB level or higher (MASTER VOLUME), which is sufficient to operate directly with power amplifier. In case of connection to a mixer the preamp has speaker simulator mode. The mode can be selected by the switch loicated on the left panel of the device. AMT Electronics V1 comes with 12V PS included (EU plug only). AMT V-1 provides the built-in power hub to supply 912V to external channel and auxiliary effects. Works great with an overdrive/booster pedal in front of V-1. In case of connection to Ch. Return AMT V-1 preamp there is a bi-color LED indicator (located on the front panel). Clean channel AMT V-1 – green. Lead external channel – red. If AMT V-1 is used in mono mode (without external overdriven channels) the LED is single-colored and the footswitch acts as «Bypass» Clean channel AMT V-1. Is a new revolutionary series of one-channel preamps (JFET-preamps) from AMT Electronics, developed with principally new approach to guitar sound formation. The technology of analog modeling of the physical processes occurring in real vacuum tube limiting the guitar signals was used as the basis for the new guitar pedals series. It became possible due to the application of original circuitry solutions. The series channels structuring conforms to the processes occurring in real tube-based devices. It results in formation of the structure of limitation, dynamics and range close to he ones used in popular tube amplifiers. Having compact sizes and low energy consumption characteristic to semiconductor-based effects AMT Legend Amps possess a number of unique features found in real tube preamps and amplifiers. Preamps included into AMT Legend Amps series provide excellent playing dynamics characteristic to real tube-based devices and are in no way inferior to them. With the limitation range similar to tube channel the preamps of the series ensure terrific thickness and power to the resulting sound. Working with AMT Legend Amps preamps you wont feel the urge to cut out the most informative middle frequencies, which in turn will provide great readability of your guitar in the sound mix. Like tube preamps AMT Legend amps provide gradual increase of the limiting stages number as the gain grows. The series preamps use passive circuits of tone shaping which are in full conformity with the tone controls during original tube overdrives. The high level of output signal of AMT Legend Amps (+10 dB at max Level position) corresponds to the tube preamps output signal levels. Thus you have adjustable signal level which makes it possible to connect the preamps to any input RETURN, DIRECT, LINE etc. Including INPUT POWER AMP. Names used in this document are trademarks of their respective owners, which are in no way are associated or affiliated with AMT Electronics. These trademarks of other manufactures were used to identify products whose sounds were reviewed in the making of this product. Input consumption current (mA). Preamp / cabsim / footswitch (activation loop mode). Yes (AMT DC 12V, 1.25 AC/DC) (Only EU Plug included). Range of operating voltage (V). The polarity of the power supply connector. Minus is inside, plus is outside. The item “AMT Electronics V1 (VOX) guitar preamp (distortion/overdrive) effect pedal” is in sale since Wednesday, October 3, 2018. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Effects Pedals\Distortion & Overdrive”. The seller is “muzzzlo” and is located in Saint-Petersburg, Saint-Petersburg. This item can be shipped worldwide.
  • Model: V-1
  • To Fit: Electric Guitar
  • Country/Region of Manufacture: Russian Federation
  • Custom Bundle: No
  • Effects Type: Distortion, Overdrive
  • Modified Item: No
  • Product Type: Effects Pedals
  • Non-Domestic Product: No
  • Type: Distortion
  • MPN: Does Not Apply
  • Brand: AMT Electronics

AMT Electronics V1 (VOX) guitar preamp (distortion/overdrive) effect pedal

TC Electronics Fluorescence Shimmer Reverb Guitar Effect Pedal

TC Electronics Fluorescence Shimmer Reverb Guitar Effect Pedal
TC Electronics Fluorescence Shimmer Reverb Guitar Effect Pedal
TC Electronics Fluorescence Shimmer Reverb Guitar Effect Pedal
TC Electronics Fluorescence Shimmer Reverb Guitar Effect Pedal

TC Electronics Fluorescence Shimmer Reverb Guitar Effect Pedal
TC Electronics Fluorescence Shimmer Reverb Pedal. Inspired by legendary music producers, the Fluorescence Shimmer Reverb creates lush soundscapes by layering a tail of pitch octave reverb on top of the dry signal. The effect produces reverb of clarity and shimmering vibrancy, and takes a life of its own. TC Electronics Gauss Tape Echo Pedal – YouTube. Video will open in a new window. Fluorescence Shimmer Reverb Pedal Inspired by legendary music producers like Brian Eno and Daniel Lanois, Tc Electronic’s Fluorescence Shimmer Reverb pedal creates lush soundscapes by layering a tail of pitch octave reverb on top of the dry signal. Producer Inspired Used extensively by U2’s The Edge, the shimmer effect has been adopted by scores of shoegaze guitar players for conjuring up huge, vibrant soundscapes, bursting with sparkling clarity. Ever since U2 started working with producers Eno and Lanois, shimmer has found its way on to classic performances like With or Without You. Control Simplified With only 4 controls to master, this shimmer reverb pedal makes it easy to fine-tune your ethereal resonances in great depth. A Reverb knob adjusts the amount of tail on your dry signal for short or long resonances. The Mix knob lets you adjust the balance between the reverb tail and your guitar sound, while the Tone knob sets the amount of sparkle thats added to the reverb. Lastly, the Shimmer knob rolls in the perfect amount of sparkling, angelic octave tones to round out its thick and ethereal ambience. Shimmering, super-bright reverb pedal sends you straight to shoegaze heaven. Effortlessly create celestial reverb sounds. Intuitive 4-knob interface including dedicated shimmer knob. True bypass for ultimate signal integrity. Runs on 9 V battery or PSU-SB DC power supply (not included). Designed and engineered in Denmark. You May Also Like. SWAMP PDB-40SM Small-Medium Guitar Effect Pedal Board Bridge 45x31cm Loop Tape. Ernie Ball 6188 Expression Tremolo Pedal. JOYO Ironman JF-317 Space Verb – Reverb Guitar Pedal. JOYO JGE-01 Wireless Handheld Infinite Guitar Sustainer. JOYO R-14 Atmosphere Reverb Guitar Effect Pedal Shimmer Church Plate Spring. NUX NDR5 Verdugo Series Atlantic Multi Delay & Reverb Effects Pedal Guitar Bass. SWAMP PDB-60M Medium Guitar Effect Pedal Board Bridge – 60×30.5cm. SWAMP Padded Carry Bag for Medium Guitar Effect Pedal Bridge. SWAMP Padded Carry Bag for Large Guitar Effect Pedal Board Bridge. MOEN PB-LINK Pedal Board Bridge Linking Tool Set. Sign Up For Store Newsletter Sign Up. Warehouse / Showroom Address Unit 1, 39 Collie St Fyshwick ACT 2609. The item “TC Electronics Fluorescence Shimmer Reverb Guitar Effect Pedal” is in sale since Thursday, July 12, 2018. This item is in the category “Musical Instruments\Guitars & Basses\Parts & Accessories\Effects Pedals\Delay, Echo & Reverb”. The seller is “swamp-industries” and is located in Fyshwick, Canberra, ACT. This item can be shipped worldwide.
  • Type: Reverb Pedals
  • For Instrument: Electric Guitar
  • Model: FLUORESCENCE
  • Brand: TC-Electronic
  • MPN: FLUORESCENCE
  • Manufacturer Part Number: FLUORESCENCE

TC Electronics Fluorescence Shimmer Reverb Guitar Effect Pedal

AMT Electronics M2 (Marshall) guitar preamp (distortion/overdrive) effect pedal

AMT Electronics M2 (Marshall) guitar preamp (distortion/overdrive) effect pedal
AMT Electronics M2 (Marshall) guitar preamp (distortion/overdrive) effect pedal
AMT Electronics M2 (Marshall) guitar preamp (distortion/overdrive) effect pedal
AMT Electronics M2 (Marshall) guitar preamp (distortion/overdrive) effect pedal

AMT Electronics M2 (Marshall) guitar preamp (distortion/overdrive) effect pedal
We are glad to see you here! We wish you would find everything you need in our store. The best price (our prices are already too good, but we still leave it possible to make the Best Offer for most of our deals). If you havent visited our store yet, be sure to do it. And do not forget to add our store to your bookmarks! USA , Canada , Europe , Oceania , Asia = 2 5 weeks. South America = 4 8 weeks. Classic Marshall JCM800 mid-gain overdrive became popular in the 1980s. Its preamp section provides rich opportunities for a wide range of overdrive gain. M-2 shapes the structure of overdriven sound characteristic of JCM800 while maintaining ease at small gain and increased density at maximum values. Two-channel LA-2 series preamp effects are designed to produce clean and overdriven guitar sound within a variety of guitar channel organization. The basic concept of the series is your own sound in your pocket. LA-2 incorporates original circuit designs developed by the specialists of AMT, which allow to obtain bright and rich sound in the style of the original tube overdrives using low-voltage (9V) power and low current consumption. The distinctive feature of the series is the presence of three outputs intended for implementation of basic types of channels organization. Direct connection to guitar system power amp. Connection to “clean” channel of a guitar combo or amp. Direct connection to a mixer. All three of these outputs can be used simultaneously! Use the different outputs for recording direct and micing at the same time, run different effects through different outputs, or record three DAW tracks all at once. The routing and recording options are endless. The Legend II series of pedals are a studios engineers dream come true. Two channel preamp and distortion pedal. When connected to the amp or a mixer La-2 acts as. Providing switch between clean and overdriven channels by means of a footswitch. CLEAN channel is universal for all models of the series and sounds in the style of classic Fender amps. When using LA-2 in. The “clean” channel of an external amplifier or a combo is used. Please be aware that the used combo or amplifier largely determines the resulting sound. The series uses “partial” active bypass, which reduces the need to minimize the length of used cables and retains the original sound of the instrument when the effect is off. OD LEVEL adjusts the overall loudness of the pedal output. OD GAIN adjusts the amount of distortion and drive. HIGH controls the amount of high frequency in the signal. MIDDLE controls the amount of mid frequency in the signal. BASS controls the amount of bass frequency in the signal. CL LEVEL adjusts the buffer output of the bypassed signal, 1 o’clock positioning represents standard -10dB level. CL BOOST SWITCH engages a boost of clean signal up to +8dB when the pedal is bypassed, making the pedal a 2-channel preamp. Three outputs (CAB SIM OUT, PREAMP OUT, DRIVE OUT). Simultaneous use of all three outputs at once. Optional clean level and clean boost controls when bypassed (only with CAB SIM OUT and PREAMP OUT). LED indicator when effect is engaged SPECIFICATIONS. 9-12v DC power negative center (-), adapter or battery. Small size: 110 x 62 x 58 mm. Names used in this document are trademarks of their respective owners, which are in no way are associated or affiliated with AMT Electronics. These trademarks of other manufactures were used to identify products whose sounds were reviewed in the making of this product. Yes, the battery 6LR61 (9v). Input consumption current (mA). It is for electric guitar. Preamp / overdrive pedal / cabsim (possible to use at the same time). Range of operating voltage (V). The polarity of the power supply connector. Minus is inside, plus is outside. The item “AMT Electronics M2 (Marshall) guitar preamp (distortion/overdrive) effect pedal” is in sale since Tuesday, February 5, 2019. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Effects Pedals\Distortion & Overdrive”. The seller is “muzzzlo” and is located in Saint-Petersburg, Saint-Petersburg. This item can be shipped worldwide.
  • Model: M-2
  • To Fit: Electric Guitar
  • Country/Region of Manufacture: Russian Federation
  • Custom Bundle: No
  • Effects Type: Distortion, Overdrive
  • Modified Item: No
  • Product Type: Effects Pedals
  • Non-Domestic Product: No
  • Type: Distortion
  • MPN: Does Not Apply
  • Brand: AMT Electronics

AMT Electronics M2 (Marshall) guitar preamp (distortion/overdrive) effect pedal

AMT Electronics O2 (Orange) guitar preamp (distortion/overdrive) effect pedal

AMT Electronics O2 (Orange) guitar preamp (distortion/overdrive) effect pedal
AMT Electronics O2 (Orange) guitar preamp (distortion/overdrive) effect pedal
AMT Electronics O2 (Orange) guitar preamp (distortion/overdrive) effect pedal
AMT Electronics O2 (Orange) guitar preamp (distortion/overdrive) effect pedal

AMT Electronics O2 (Orange) guitar preamp (distortion/overdrive) effect pedal
We are glad to see you here! We wish you would find everything you need in our store. The best price (our prices are already too good, but we still leave it possible to make the Best Offer for most of our deals). If you havent visited our store yet, be sure to do it. And do not forget to add our store to your bookmarks! USA , Canada , Europe , Oceania , Asia = 2 5 weeks. South America = 4 8 weeks. Moderate-gain amps such as Orange are favored by fans of velvet and sparkling sound, the one we tried to reproduce with special warmness in O-2 model. Two-channel LA-2 series preamp effects are designed to produce clean and overdriven guitar sound within a variety of guitar channel organization. The basic concept of the series is your own sound in your pocket. LA-2 incorporates original circuit designs developed by the specialists of AMT, which allow to obtain bright and rich sound in the style of the original tube overdrives using low-voltage (9V) power and low current consumption. The distinctive feature of the series is the presence of three outputs intended for implementation of basic types of channels organization. Direct connection to guitar system power amp. Connection to “clean” channel of a guitar combo or amp. Direct connection to a mixer. All three of these outputs can be used simultaneously! Use the different outputs for recording direct and micing at the same time, run different effects through different outputs, or record three DAW tracks all at once. The routing and recording options are endless. The Legend II series of pedals are a studios engineers dream come true. Two channel preamp and distortion pedal. When connected to the amp or a mixer La-2 acts as. Providing switch between clean and overdriven channels by means of a footswitch. CLEAN channel is universal for all models of the series and sounds in the style of classic Fender amps. When using LA-2 in. The “clean” channel of an external amplifier or a combo is used. Please be aware that the used combo or amplifier largely determines the resulting sound. The series uses “partial” active bypass, which reduces the need to minimize the length of used cables and retains the original sound of the instrument when the effect is off. OD LEVEL adjusts the overall loudness of the pedal output. OD GAIN adjusts the amount of distortion and drive. HIGH controls the amount of high frequency in the signal. MIDDLE controls the amount of mid frequency in the signal. BASS controls the amount of bass frequency in the signal. CL LEVEL adjusts the buffer output of the bypassed signal, 1 o’clock positioning represents standard -10dB level. CL BOOST SWITCH engages a boost of clean signal up to +8dB when the pedal is bypassed, making the pedal a 2-channel preamp. Three outputs (CAB SIM OUT, PREAMP OUT, DRIVE OUT). Simultaneous use of all three outputs at once. Optional clean level and clean boost controls when bypassed (only with CAB SIM OUT and PREAMP OUT). LED indicator when effect is engaged SPECIFICATIONS. 9-12v DC power negative center (-), adapter or battery. Small size: 110 x 62 x 58 mm. Names used in this document are trademarks of their respective owners, which are in no way are associated or affiliated with AMT Electronics. These trademarks of other manufactures were used to identify products whose sounds were reviewed in the making of this product. Yes, the battery 6LR61 (9v). Input consumption current (mA). It is for electric guitar. Preamp / overdrive pedal / cabsim (possible to use at the same time). Range of operating voltage (V). The polarity of the power supply connector. Minus is inside, plus is outside. The item “AMT Electronics O2 (Orange) guitar preamp (distortion/overdrive) effect pedal” is in sale since Saturday, May 26, 2018. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Effects Pedals\Distortion & Overdrive”. The seller is “muzzzlo” and is located in Saint-Petersburg, Saint-Petersburg. This item can be shipped worldwide.
  • Model: O-2
  • To Fit: Electric Guitar
  • Country/Region of Manufacture: Russian Federation
  • Custom Bundle: No
  • Effects Type: Distortion, Overdrive
  • Modified Item: No
  • Product Type: Effects Pedals
  • Non-Domestic Product: No
  • Type: Distortion
  • MPN: Does Not Apply
  • Brand: AMT Electronics

AMT Electronics O2 (Orange) guitar preamp (distortion/overdrive) effect pedal

AMT Electronics D2 (Diezel) guitar preamp (distortion/overdrive) effect pedal

AMT Electronics D2 (Diezel) guitar preamp (distortion/overdrive) effect pedal
AMT Electronics D2 (Diezel) guitar preamp (distortion/overdrive) effect pedal
AMT Electronics D2 (Diezel) guitar preamp (distortion/overdrive) effect pedal
AMT Electronics D2 (Diezel) guitar preamp (distortion/overdrive) effect pedal

AMT Electronics D2 (Diezel) guitar preamp (distortion/overdrive) effect pedal
We are glad to see you here! We wish you would find everything you need in our store. The best price (our prices are already too good, but we still leave it possible to make the Best Offer for most of our deals). If you havent visited our store yet, be sure to do it. And do not forget to add our store to your bookmarks! USA , Canada , Europe , Oceania , Asia = 2 5 weeks. South America = 4 8 weeks. D2 of the LA2 Series represents the response, characteristics, gain, and tonal nuances similar to that of Diezel Amplifiers. Two-channel LA-2 series preamp effects are designed to produce clean and overdriven guitar sound within a variety of guitar channel organization. The basic concept of the series is your own sound in your pocket. LA-2 incorporates original circuit designs developed by the specialists of AMT, which allow to obtain bright and rich sound in the style of the original tube overdrives using low-voltage (9V) power and low current consumption. The distinctive feature of the series is the presence of three outputs intended for implementation of basic types of channels organization. Direct connection to guitar system power amp. Connection to “clean” channel of a guitar combo or amp. Direct connection to a mixer. All three of these outputs can be used simultaneously! Use the different outputs for recording direct and micing at the same time, run different effects through different outputs, or record three DAW tracks all at once. The routing and recording options are endless. The Legend II series of pedals are a studios engineers dream come true. Two channel preamp and distortion pedal. When connected to the amp or a mixer La-2 acts as. Providing switch between clean and overdriven channels by means of a footswitch. CLEAN channel is universal for all models of the series and sounds in the style of classic Fender amps. When using LA-2 in. The “clean” channel of an external amplifier or a combo is used. Please be aware that the used combo or amplifier largely determines the resulting sound. The series uses “partial” active bypass, which reduces the need to minimize the length of used cables and retains the original sound of the instrument when the effect is off. OD LEVEL adjusts the overall loudness of the pedal output. OD GAIN adjusts the amount of distortion and drive. HIGH controls the amount of high frequency in the signal. MIDDLE controls the amount of mid frequency in the signal. BASS controls the amount of bass frequency in the signal. CL LEVEL adjusts the buffer output of the bypassed signal, 1 o’clock positioning represents standard -10dB level. CL BOOST SWITCH engages a boost of clean signal up to +8dB when the pedal is bypassed, making the pedal a 2-channel preamp. Three outputs (CAB SIM OUT, PREAMP OUT, DRIVE OUT). Simultaneous use of all three outputs at once. Optional clean level and clean boost controls when bypassed (only with CAB SIM OUT and PREAMP OUT). LED indicator when effect is engaged SPECIFICATIONS. 9-12v DC power negative center (-), adapter or battery. Small size: 110 x 62 x 58 mm. Names used in this document are trademarks of their respective owners, which are in no way are associated or affiliated with AMT Electronics. These trademarks of other manufactures were used to identify products whose sounds were reviewed in the making of this product. Yes, the battery 6LR61 (9v). Input consumption current (mA). It is for electric guitar. Preamp / overdrive pedal / cabsim (possible to use at the same time). Range of operating voltage (V). The polarity of the power supply connector. Minus is inside, plus is outside. The item “AMT Electronics D2 (Diezel) guitar preamp (distortion/overdrive) effect pedal” is in sale since Sunday, January 14, 2018. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Effects Pedals\Distortion & Overdrive”. The seller is “muzzzlo” and is located in Saint-Petersburg, Saint-Petersburg. This item can be shipped worldwide.
  • Effects Type: Distortion, Overdrive
  • Custom Bundle: No
  • MPN: Does Not Apply
  • Modified Item: No
  • Product Type: Effects Pedals
  • Country/Region of Manufacture: Russian Federation
  • To Fit: Electric Guitar
  • Non-Domestic Product: No
  • Model: D-2
  • Brand: AMT Electronics
  • Type: Preamp

AMT Electronics D2 (Diezel) guitar preamp (distortion/overdrive) effect pedal

AMT Electronics S2 (Soldano) guitar preamp (distortion/overdrive) effect pedal

AMT Electronics S2 (Soldano) guitar preamp (distortion/overdrive) effect pedal
AMT Electronics S2 (Soldano) guitar preamp (distortion/overdrive) effect pedal
AMT Electronics S2 (Soldano) guitar preamp (distortion/overdrive) effect pedal
AMT Electronics S2 (Soldano) guitar preamp (distortion/overdrive) effect pedal

AMT Electronics S2 (Soldano) guitar preamp (distortion/overdrive) effect pedal
We are glad to see you here! We wish you would find everything you need in our store. The best price (our prices are already too good, but we still leave it possible to make the Best Offer for most of our deals). If you havent visited our store yet, be sure to do it. And do not forget to add our store to your bookmarks! USA , Canada , Europe , Oceania , Asia = 2 5 weeks. South America = 4 8 weeks. In the early 90’s Mike Soldano created the amp, which later became a kind of a standard for metal sound realized with variations in Lead channels of various amplifiers (Soldano, Mesa / Boogie Rectifier, H & K Triamp). The common sound basis of these amplifiers was the 5-stage preamp, whose solid and bright sound is reproduced by the S2. Two-channel LA-2 series preamp effects are designed to produce clean and overdriven guitar sound within a variety of guitar channel organization. The basic concept of the series is your own sound in your pocket. LA-2 incorporates original circuit designs developed by the specialists of AMT, which allow to obtain bright and rich sound in the style of the original tube overdrives using low-voltage (9V) power and low current consumption. The distinctive feature of the series is the presence of three outputs intended for implementation of basic types of channels organization. Direct connection to guitar system power amp. Connection to “clean” channel of a guitar combo or amp. Direct connection to a mixer. All three of these outputs can be used simultaneously! Use the different outputs for recording direct and micing at the same time, run different effects through different outputs, or record three DAW tracks all at once. The routing and recording options are endless. The Legend II series of pedals are a studios engineers dream come true. Two channel preamp and distortion pedal. When connected to the amp or a mixer La-2 acts as. Providing switch between clean and overdriven channels by means of a footswitch. CLEAN channel is universal for all models of the series and sounds in the style of classic Fender amps. When using LA-2 in. The “clean” channel of an external amplifier or a combo is used. Please be aware that the used combo or amplifier largely determines the resulting sound. The series uses “partial” active bypass, which reduces the need to minimize the length of used cables and retains the original sound of the instrument when the effect is off. OD LEVEL adjusts the overall loudness of the pedal output. OD GAIN adjusts the amount of distortion and drive. HIGH controls the amount of high frequency in the signal. MIDDLE controls the amount of mid frequency in the signal. BASS controls the amount of bass frequency in the signal. CL LEVEL adjusts the buffer output of the bypassed signal, 1 o’clock positioning represents standard -10dB level. CL BOOST SWITCH engages a boost of clean signal up to +8dB when the pedal is bypassed, making the pedal a 2-channel preamp. Three outputs (CAB SIM OUT, PREAMP OUT, DRIVE OUT). Simultaneous use of all three outputs at once. Optional clean level and clean boost controls when bypassed (only with CAB SIM OUT and PREAMP OUT). LED indicator when effect is engaged SPECIFICATIONS. 9-12v DC power negative center (-), adapter or battery. Small size: 110 x 62 x 58 mm. Names used in this document are trademarks of their respective owners, which are in no way are associated or affiliated with AMT Electronics. These trademarks of other manufactures were used to identify products whose sounds were reviewed in the making of this product. Yes, the battery 6LR61 (9v). Input consumption current (mA). It is for electric guitar. Preamp / overdrive pedal / cabsim (possible to use at the same time). Range of operating voltage (V). The polarity of the power supply connector. Minus is inside, plus is outside. The item “AMT Electronics S2 (Soldano) guitar preamp (distortion/overdrive) effect pedal” is in sale since Tuesday, December 25, 2018. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Effects Pedals\Distortion & Overdrive”. The seller is “muzzzlo” and is located in Saint-Petersburg, Saint-Petersburg. This item can be shipped worldwide.
  • Effects Type: Distortion, Overdrive
  • Custom Bundle: No
  • MPN: Does Not Apply
  • Modified Item: No
  • Product Type: Effects Pedals
  • Country/Region of Manufacture: Russian Federation
  • To Fit: Electric Guitar
  • Non-Domestic Product: No
  • Model: S-2
  • Brand: AMT Electronics
  • Type: Distortion

AMT Electronics S2 (Soldano) guitar preamp (distortion/overdrive) effect pedal

AMT Electronics F1 (Fender) guitar preamp (distortion/overdrive) effect pedal

AMT Electronics F1 (Fender) guitar preamp (distortion/overdrive) effect pedal
AMT Electronics F1 (Fender) guitar preamp (distortion/overdrive) effect pedal
AMT Electronics F1 (Fender) guitar preamp (distortion/overdrive) effect pedal
AMT Electronics F1 (Fender) guitar preamp (distortion/overdrive) effect pedal
AMT Electronics F1 (Fender) guitar preamp (distortion/overdrive) effect pedal

AMT Electronics F1 (Fender) guitar preamp (distortion/overdrive) effect pedal
We are glad to see you here! We wish you would find everything you need in our store. The best price (our prices are already too good, but we still leave it possible to make the Best Offer for most of our deals). If you havent visited our store yet, be sure to do it. And do not forget to add our store to your bookmarks! USA , Canada , Europe , Oceania , Asia = 2 5 weeks. South America = 4 8 weeks. AMT F-1 is the first among the basic modules of the entire AMT Legend Amps series. The pedal is designed around the specs of the Fender Twin amplifier. You can use AMT F-1 to build a multi-channel preamp from mono channels of AMT Legend Amps series – P-1, B-1, M-1, R-1, S-1. The series is constantly expanding thus giving you a chance to obtain a unique 100% analog tool for your guitar sound shaping. AMT F-1 is a preamp with internal CLEAN channel and the possibility of switching to external channel (any auxiliary overdrive effect) by means of a foot switch. AMT F-1 has the insert loop of serial type with standard -10dB level intended for connection of auxiliary effects and boosting the effect signal to standard 0dB level or higher (MASTER VOLUME), which is sufficient to operate directly with power amplifier. In case of connection to a mixer the preamp has speaker simulator mode. The mode can be selected by the switch loicated on the left panel of the device. AMT Electronics F1 comes with 12V PS included (EU-plug). AMT F-1 provides the built-in power hub to supply 912V to external channel and auxiliary effects. The bottom of AMT F-1 (under the boxs cover) has FX. Loop mode switch serial/parallel which significantly expands your choices. Works great with an overdrive/booster pedal in front of F-1. In case of connection to Ch. Return AMT F-1 preamp there is a bi-color LED indicator (located on the front panel). Clean channel AMT F-1 – green. Lead external channel – red. If AMT F-1 is used in mono mode (without external overdriven channels) the LED is single-colored and the footswitch acts as «Bypass» Clean channel AMT F-1. Is a new revolutionary series of one-channel preamps (JFET-preamps) from AMT Electronics, developed with principally new approach to guitar sound formation. The technology of analog modeling of the physical processes occurring in real vacuum tube limiting the guitar signals was used as the basis for the new guitar pedals series. It became possible due to the application of original circuitry solutions. The series channels structuring conforms to the processes occurring in real tube-based devices. It results in formation of the structure of limitation, dynamics and range close to he ones used in popular tube amplifiers. Having compact sizes and low energy consumption characteristic to semiconductor-based effects AMT Legend Amps possess a number of unique features found in real tube preamps and amplifiers. Preamps included into AMT Legend Amps series provide excellent playing dynamics characteristic to real tube-based devices and are in no way inferior to them. With the limitation range similar to tube channel the preamps of the series ensure terrific thickness and power to the resulting sound. Working with AMT Legend Amps preamps you wont feel the urge to cut out the most informative middle frequencies, which in turn will provide great readability of your guitar in the sound mix. Like tube preamps AMT Legend amps provide gradual increase of the limiting stages number as the gain grows. The series preamps use passive circuits of tone shaping which are in full conformity with the tone controls during original tube overdrives. The high level of output signal of AMT Legend Amps (+10 dB at max Level position) corresponds to the tube preamps output signal levels. Thus you have adjustable signal level which makes it possible to connect the preamps to any input RETURN, DIRECT, LINE etc. Including INPUT POWER AMP. Names used in this document are trademarks of their respective owners, which are in no way are associated or affiliated with AMT Electronics. These trademarks of other manufactures were used to identify products whose sounds were reviewed in the making of this product. Input consumption current (mA). Preamp / cabsim / footswitch (activation loop mode). Yes (AMT DC 12V, 1.25 AC/DC) (Only EU Plug included). Range of operating voltage (V). The polarity of the power supply connector. Minus is inside, plus is outside. The item “AMT Electronics F1 (Fender) guitar preamp (distortion/overdrive) effect pedal” is in sale since Tuesday, May 29, 2018. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Effects Pedals\Distortion & Overdrive”. The seller is “muzzzlo” and is located in Saint-Petersburg, Saint-Petersburg. This item can be shipped worldwide.
  • Effects Type: Distortion, Overdrive
  • Custom Bundle: No
  • MPN: Does Not Apply
  • Modified Item: No
  • Product Type: Effects Pedals
  • Country/Region of Manufacture: Russian Federation
  • To Fit: Electric Guitar
  • Non-Domestic Product: No
  • Model: F1
  • Brand: AMT Electronics
  • To Fit Guitar: Electric Guitar
  • Type: Distortion

AMT Electronics F1 (Fender) guitar preamp (distortion/overdrive) effect pedal